Kyocera KM-2550 Basic Guide - Page 100
Printer], Enter - drum
View all Kyocera KM-2550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Troubleshooting Problem Black lines appear on copies when copying from the optional document processor. Checkpoint Is the slit glass dirty? Procedure Clean the slit glass. It is also possible to use the black line correction function to make any black lines on the copies less apparent. Wrinkling occurs on copies. Black or white vertical lines appear on copies. White spots appear on copies. Copies are blurred. (25 ppm model only) Is the separation needle Clean the separation needle. dirty? Is the electrical charge section dirty? Open the front cover and use the charger cleaner rod to clean the electrical charge section. Is the transfer roller dirty? Clean the transfer roller with the cleaning brush. Is the machine used at Perform drum refresh. high humidity? Printing cannot be performed. Is the power plug connected to an AC outlet? Connect the plug to an AC outlet. Is the main power switch Switch on the main power ( | ). turned on? Is a proper printer cable Connect the printer cable securely. connected securely? Was the printer cable After connecting the printer cable, connected after the switch on the main power ( | ). machine was turned on? Is the machine offline? Is the Ready indicator off? • Press [Printer] to display the Printer Basic screen. • Press S or T to select [GO] and press [Enter]. The Ready indicator displays. Correct characters are Is a proper printer cable Connect a shielded type printer cable. not printed. connected? Printing is not performed Is the setting on the properly. computer correct? Check the setting of the printer driver or the application software. Reference page page 5-2 Chapter 3, Advanced Operation Guide page 5-3 page 5-7 page 5-4 Chapter 3, Advanced Operation Guide page 2-10 page 2-12 page 2-10 page 2-12 - page 2-10 - 6-4 BASIC OPERATION GUIDE