Kyocera KM-2550 Basic Guide - Page 104
Troubleshooting, BASIC OPERATION GUIDE, Output Tray, Separator, Finisher, Printer], Enter]
View all Kyocera KM-2550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Troubleshooting Message Procedure Remove paper from Top tray. Press GO The Output Tray capacity has been exceeded during printing. There are 250 sheets in the Output Tray. There are 150 sheets in the Output Tray and the optional Job Separator is installed. There are 100 sheets in the Output Tray and the optional Finisher is installed. Remove the output. • Press [Printer] and press S or T to select [GO]. • Press [Enter]. Printing will resume. • To cancel printing, select [CANCEL] and press [Enter]. Remove paper from Finisher. Press START key. There are 250 sheets in the optional Finisher during copying. Remove the output. Remove paper from Finisher. Press GO There are 250 sheets in the optional Finisher during printing. Remove the output. • Press [Printer] and press S or T to select [GO]. • Press [Enter]. Printing will resume. • To cancel printing, select [CANCEL] and press [Enter]. Paper capacity exceeded. Remove paper from Job Separator. There are already 100 sheets of paper stored on the optional job separator. Remove the output. Paper misfeed in Paper has jammed in the optional Finisher. Finisher, lower Process Remove the output. Tray and remove paper. Out of Staples Please Add Staples or Stapler Empty. Add Staples. There are no staples left in the optional Finisher. Add staples. Cannot staple this size. or Cannot staple this pap. Size Stapling of small paper, such as 5 1/2 × 8 1/2" (Statement), A5R, and B5R, is not possible. System error. Main switch off / on. This message displays when a malfunction or communication error during printer processing has occurred. • Switch off the main power ({). If the machine is printing, cancel the job from the computer. • Wait over five seconds and then switch on the main power ( | ). The error is cleared. If necessary, resubmit the print job. RAM disk error Press GO An error has occurred in writing to or reading from the RAM disk. • Press [Printer] and press S or T to select [GO] and press [Enter]. The error is cleared. Reference page - - - - page 6-18 page 4-8 - - - 6-8 BASIC OPERATION GUIDE