Kyocera KM-2550 Basic Guide - Page 68
Low Power Mode, Energy Saver, Auto Low Power
View all Kyocera KM-2550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Basic Operation Low Power Mode Energy Saver 1 Press [Energy Saver] to place the machine into an energysaving state. Only the Energy Saver indicator, Power indicator, and the Main Power indicator remain lit on the operation panel. 2 Press [Energy Saver] again to resume copying operations. The recovery time before copies can be made is 10 seconds. NOTE: In Low Power mode, if the machine receives print or fax data it will automatically engage and output the data. Auto Low Power The Auto Low Power function automatically puts this machine into the lower power mode if no operation has been performed on the machine for a preset period of time. The factory default setting time is 15 minutes. Auto Low Power mode automatically puts the machine into an energysaving state if no operation has been performed for a preset period of time. The factory default setting is 15 minutes. Time that can be set: • Inch Specification - 1 to 240 minutes (in 1 minute increments) • Metric Specification - 1 to 120 minutes (in 1 minute increments) NOTE: It is possible to set the amount of time before Low Power mode engages. For details, refer to Chapter 3, Advanced Operation Guide. 3-18 BASIC OPERATION GUIDE