Kyocera KM-2550 Basic Guide - Page 43
Connecting to a Parallel or USB Interface, Preparation, BASIC OPERATION GUIDE, Power, Switch
View all Kyocera KM-2550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Preparation Connecting to a Parallel or USB Interface To connect the machine directly to your computer, use a parallel cable or a USB cable. IMPORTANT: Always power off the machine ({) and remove the power cord from the outlet before connecting the printer cable. Ensure your computer is also switched off. 1 Open the main power switch cover on the right side of the machine and press the Power Switch to Off ({), then remove the power cord from the outlet. 2 Connect the printer cable (not included) to the Parallel Interface Connector or USB Interface Connector located on the right side of the machine. NOTE: Use a USB cable that complies with Revision 2.0 of USB standard (a rectangular Type A plug and a square Type B plug).The USB cable should be shielded and not be longer than 5 meters (16 feet). 3 Connect the other end of the printer cable to the Parallel Interface Connector or USB Interface Connector on your computer. BASIC OPERATION GUIDE 2-11