Kyocera KM-2550 Basic Guide - Page 42
Connection, Connecting to a Network
View all Kyocera KM-2550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Preparation Connection This machine can be connected to a computer through a network, parallel or USB interface. Connecting to a Network To connect the machine to a network, use a network cable (10Base-T or 100Base-TX). 1 Open the main power switch cover on the right side of the machine and press the Power Switch to Off ({), then remove the power cord from the outlet. 2 Connect the network cable to the Network Interface Connector on the right side of the machine. 3 Connect the other end of the network cable to your network device (hub). 4 Program the required network settings. For further information refer to Network Settings, on page 2-13. 2-10 BASIC OPERATION GUIDE
Preparation
2-10
BASIC OPERATION GUIDE
Connection
This machine can be connected to a computer through a network, parallel
or USB interface.
Connecting to a Network
To connect the machine to a network, use a network cable (10Base-T or
100Base-TX).
1
Open the main power switch
cover on the right side of the
machine and press the
Power
Switch
to
Off
(
), then remove
the power cord from the outlet.
2
Connect the network cable to the
Network Interface Connector
on
the right side of the machine.
3
Connect the other end of the network cable to your network device (hub).
4
Program the required network settings. For further information refer to
Network Settings, on page 2-13.