Lenovo NetVista A22 Hardware Maintenance Manual (HMM) for NetVista 2254, 2256, - Page 65
Important,
View all Lenovo NetVista A22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
3. Position the cover over the chassis so that the front edge is approximately one inch away from the front bezel. 4. Lower the cover down over the chassis so that the rail guides engage the rails. 5. Slide the cover forward. You might need to lift the front of the cover slightly to align it properly. 6. Insert the three thumbscrews into the holes in the cover and the chassis and tighten. 7. Reconnect the external cables and cords to the computer. 8. To update the configuration, see "Module test menu/hardware configuration report" on page 13. Important: When the power cord is first plugged in, the computer might appear to power on for a few seconds, then power off. This is a normal sequence to enable the computer to initialize. Chapter 4. Installing Options 57