Lexmark 4076 Execjet II Service Manual - Page 36
Diagnostic Aids, Demo Test, Print Fonts Test
View all Lexmark 4076 Execjet II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
4076-0XX Diagnostic Aids 4 Use these diagnostic test procedures to verify a repair. The test procedures are entered by pressing and holding a button, or buttons, as you turn on the printer. Except for the Hex Print test procedure, the printer does not need to be attached to a host to run the tests. You can press the buttons with the operator panel cover open or closed. You must hold the buttons until all the lights are off. To terminate a test press the Reset button, or turn the printer off. The button pattern is illustrated for each test. Press the buttons that are shaded. Demo Test Perform this test with a black print cartridge installed. This test prints a two-page demo pattern. Use this test to check the overall quality of line print and graphics. Print Fonts Test Perform this test with a black print cartridge installed. This test prints a sample of each font installed in the printer. This includes resident fonts and fonts stored in FLASH memory. Fonts downloaded to RAM cannot be printed with this test because the power off/on sequence deletes all RAM fonts. This test also lists the emulation mode and the installed options. Diagnostic Aids 24