Lexmark 6500 User Guide - Page 172

Understanding the printer menus 172 Use Sharpness 1-5 Temperature ‑4 to 4 Sample Copy Off On Fax Settings menu To Adjust the amount of sharpness of a copy job. Note: 3 is the factory default setting. Specify warm or cool outputs. Cool values generate a bluer output than the default while warm values generate a redder output than the default. Note: 0 is the factory default setting. Create a sample copy of the original document. Note: Off is the factory default setting. Fax Mode (Analog Fax Setup) menu Analog Fax Setup mode sends the fax job by way of a telephone line. General Fax Settings Use Restore Factory Defaults Optimize Fax Compatibility Station Name Station Number Station ID Station Name Station Number Enable Manual Fax Off On Memory Use Equal Mostly send All send All receive Mostly receive Cancel Faxes Allow Don't Allow To Restore the factory defaults of all fax settings. Optimize fax compatibility with other fax machines. Specify the name of the fax in the printer. Specify the number assigned to the fax. Specify how the fax is identified. Note: Station Name is the factory default setting. Set the printer to fax manually. This requires a line splitter and a telephone handset. Notes: • Off is the factory default setting. • Use a regular telephone to answer an incoming fax job and to dial a fax number. • Touch # 0 on the numeric keypad to go directly to this setting. Define the allocation of non-volatile memory between sending and receiving fax jobs. Note: Equal is the factory default setting. Specify whether canceling of fax jobs is allowed. Note: Allow is the factory default setting.