Lexmark 6500 User Guide - Page 261

Troubleshooting 261 88 Cartridge low 1 Remove the specified cartridge. Warning-Potential Damage: Be careful not to touch the photoconductor drum. Doing so may affect the print quality of future print jobs. 2 Firmly shake the cartridge side‑to‑side and front‑to‑back several times to redistribute the toner. 3 Reinsert the cartridge, and then touch Continue to clear the message and continue printing. Notes: • Repeat this procedure multiple times until the print remains faded. When the print remains faded, replace the cartridge. • Have a new cartridge available when the current one no longer prints satisfactorily. 88.xx Replace cartridge 1 Replace the specified toner or print cartridge. From the scanner control panel, touch More Information for instructions on replacing the cartridge. 2 Touch Continue to clear the message and continue printing. 2yy.xx Close flatbed cover and load originals if restarting job Try one or more of the following: • Touch Cancel job to cancel the job and clear the message. • Touch Scan from automatic feeder to resume the scan job from the ADF immediately following the last successfully scanned page. • Touch Scan from flatbed to resume the scan job from the scanner glass immediately following the last successfully scanned page. • Touch Finish job without further scanning to end the scan job at the last successfully scanned page. Note: This does not cancel the scan job. All successfully scanned pages will be processed further for copying, faxing, and e-mailing. 280.06 Paper missing Try one or more of the following: • Touch Continue to clear the message. • Touch Cancel job to cancel the job and clear the message. • Touch Scan from automatic feeder to resume the scan job from the ADF immediately following the last successfully scanned page. • Touch Scan from flatbed to resume the scan job from the scanner glass immediately following the last successfully scanned page.