Lexmark 6500 User Guide - Page 95

Copying 95 Adjusting copy quality 1 Load an original document into the ADF tray or on the scanner glass. 2 From the home screen, navigate to: Copy > Content > specify the content type of the document > 3 Specify the content source of the document, and then touch > Copy It. Collating copies If you print multiple copies of a document, then you can choose to print the copies as a set (collated) or to print the copies as groups of pages (not collated). Collated Not collated 1 Load an original document into the ADF tray or on the scanner glass. 2 From the home screen, navigate to: Copy > enter the number of copies > Collate > select the preferred order of pages > > Copy It Placing separator sheets between copies 1 Load an original document into the ADF tray or on the scanner glass. 2 From the home screen, navigate to: Copy > Advanced Options > Separator Sheets > select where you want to place the separator sheets Note: Set Collate to (1,2,3) (1,2,3) to place separator sheets between copies. If Collate is set to (1,1,1) (2,2,2), then the separator sheets are added to the end of the copy job. For more information, see "Collating copies" on page 95. 3 Touch > Copy It. Copying multiple pages onto a single sheet In order to save paper, you can copy either two or four consecutive pages of a multiple‑page document onto a single sheet of paper. Notes: • Make sure to set the paper size to letter, legal, A4, or JIS B5.