Lexmark 6500 User Guide - Page 178

Understanding the printer menus 178 Use To ADF Skew Fix Off On Correct the slight skew in the scanned image. Note: Off is the factory default setting. Scan edge to edge Off On Specify if the original document is scanned edge-to‑edge before faxing. Note: Off is the factory default setting. Sharpness 1-5 Adjust the sharpness of a fax. Note: 3 is the factory default setting. Temperature ‑4 to 4 Specify warm or cool outputs. Cool values generate a bluer output than the default while warm values generate a redder output than the default. Enable Color Fax Scans Off by default On by default Never use Always use Enable color faxing. Note: Off by default is the factory default setting. Auto Convert Color Faxes to Mono Faxes On Off Convert all outgoing faxes to black and white. Note: On is the factory default setting. Fax Receive Settings Use Enable Fax Receive On Off Enable Caller ID On Off Fax Job Waiting None Toner Toner and Supplies Rings to Answer 1-25 Auto Reduction On Off Paper Source Auto Tray [x] Multi‑Purpose Feeder To Allow the printer to receive fax jobs. Note: On is the factory default setting. Display the number sending the incoming fax job. Note: On is the default factory setting. Remove fax jobs from the print queue when the job requires specific unavailable resources. Note: None is the factory default setting. Specify the number of rings before answering an incoming fax job. Note: 3 is the factory default setting. Scale an incoming fax job so that it fits the size of the paper loaded in the designated fax source. Note: On is the factory default setting. Specify the paper source for printing incoming fax jobs. Note: Auto is the factory default setting.