Lexmark P350 Getting Started - Page 37

Troubleshooting, Incorrect language appears on the display, Power button is not lit - power cord

Page 37 highlights

Troubleshooting • "Setup troubleshooting" on page 37 • "Print troubleshooting" on page 39 • "Jams and misfeeds troubleshooting" on page 41 • "Device troubleshooting" on page 42 • "Error messages troubleshooting" on page 43 • "Removing and reinstalling the software" on page 45 Setup troubleshooting Incorrect language appears on the display 1 Press to turn the printer off. 2 Press to turn the printer back on. 3 Press . 4 Press . 5 Press to continue. 6 Press or repeatedly until the language you want appears on the display. 7 Press to save your selection. Power button is not lit Make sure you have disconnected the power supply cord from the printer and then from the wall outlet. 1 Plug the cord all the way into the power supply port on the printer. 2 Plug the cord into an electrical outlet that other electrical devices have been using. 3 If the light is not on, press . Software does not install The following operating systems are supported: • Windows 2000 • Windows XP Troubleshooting 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53

Troubleshooting
“Setup troubleshooting” on page 37
“Print troubleshooting” on page 39
“Jams and misfeeds troubleshooting” on page 41
“Device troubleshooting” on page 42
“Error messages troubleshooting” on page 43
“Removing and reinstalling the software” on page 45
Setup troubleshooting
Incorrect language appears on the display
1
Press
to turn the printer off.
2
Press
to turn the printer back on.
3
Press
.
4
Press
.
5
Press
to continue.
6
Press
or
repeatedly until the language you want appears on the display.
7
Press
to save your selection.
Power button is not lit
Make sure you have disconnected the power supply cord from the printer and then from the wall outlet.
1
Plug the cord all the way into the power supply port on the printer.
2
Plug the cord into an electrical outlet that other electrical devices have been using.
3
If the
light is not on, press
.
Software does not install
The following operating systems are supported:
Windows 2000
Windows XP
Troubleshooting
37