Lexmark W820 Setup Guide - Page 106
Changing printer settings, Changing the PaperType setting, Changing the, Paper Type setting
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
5 Verify that the paper trays are configured for the sizes and types of paper you loaded. Changing printer Depending on the print material you use, you may need to change the settings Paper Type and the Paper Size settings. Changing the Paper Type setting Paper Type refers to the type of print material loaded in the sources: plain paper, letterhead, transparencies, card stock, a custom print material you define, and so on. Since different sources can hold different print material, you can customize the Paper Type setting for each source. The following table shows the default Paper Type settings for the paper trays: Source Tray 1 Trays 2-5 Multipurpose feeder Paper type Plain Paper Custom 2-5, respectively Custom 6 Note: If you load identical print material into two or more trays and then update the printer Paper Type and Paper Size settings (if Auto-size sensing is off) so that they are identical, the printer automatically links those trays. With tray linking in effect, the printer feeds from one tray until it is empty, and then feeds from the next linked tray. Be sure to check the Paper Type listed for each of the installed paper sources when you print the menu settings page. The printer uses the Paper Type setting to optimize print quality for the print material you specified. The Paper Type setting also affects the printer automatic source selection and tray linking functions. For these reasons, it's important to change the setting whenever you change the print material in a tray or feeder. When you are using the multipurpose feeder as a manual bypass feeder, the printer prompts you to load the necessary print material. 94 Verify printer setup