Lexmark W820 Setup Guide - Page 32
Preparing the fuser
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
8 Carefully pull the yellow tape completely out of the cartridge. Discard the tape. 9 Close the front door (Door F). Door F Preparing the fuser The fuser supports approximately 300,000 pages of single-sided printing. The printer displays a message when it is time to replace the fuser. Refer to the publications CD for details. Note: You need a coin or a flat blade screwdriver for the following steps. You must remove the two metal screws on each side of the fuser before operating the printer; otherwise, print quality will be diminished. 20 Set up printer supplies
20
Set up printer supplies
8
Carefully pull the yellow tape
completely out of the cartridge.
Discard the tape.
9
Close the front door (Door F).
Preparing the fuser
The fuser supports approximately
300,000 pages of single-sided printing.
The printer displays a message when it
is time to replace the fuser. Refer to the
publications CD for details.
Note:
You need a coin or a flat blade
screwdriver for the following steps.
You must remove the two metal screws
on each side of the fuser before
operating the printer; otherwise, print
quality will be diminished.
Door F