Lexmark W820 Setup Guide - Page 46
Step7: Install the optional duplex unit
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Step 7: Install the optional duplex unit CAUTION! If you are installing the duplex unit sometime after initial printer setup, turn the printer off and unplug the power cord before continuing. Your printer supports an optional duplex unit that lets you print on both sides of a sheet of paper. Note: If you are installing the duplex unit after having previously installed the optional envelope feeder, the envelope feeder must be removed before installing the duplex unit. Refer to the publications CD for help. Extendable bracket To install the duplex unit: 1 Make sure the multipurpose feeder is open (down position). 2 Remove the duplex unit from its packaging. Be sure to remove the packaging from under the plastic grid. There are three metal brackets on the duplex unit: two stationary brackets and one extendable bracket. Stationary brackets 34 Install the optional duplex unit