Lexmark W820 Setup Guide - Page 109
Step15: Con for TCP/IP, Setting the printer IP address
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Step 15: Configure for TCP/IP If you have TCP/IP available on your network, we recommend that you assign an IP address to the printer. Setting the printer IP address If your network is using DHCP, an address is automatically assigned. 1 Look for the address under the TCP/IP heading on the network setup page you printed in "Printing a network setup page" on page 93. 2 Go to "Verifying the IP settings" on page 98 and begin with step 2. Note: You can find instructions for other methods of setting the IP address in the online documentation on the drivers CD that shipped with your printer. If your network is not using DHCP, then you must manually assign an IP address. One of the easiest ways is to use the operator panel: 1 Press Menu until you see Network Menu, and then press Select. 2 Press Menu until you see Standard Network, and then press Select. (Standard Network appears if you purchased a printer with an on-board network port.) If you have an optional MarkNet card installed in slot 1 or 2, you see Network Option 1 or Network Option 2. 3 Press Menu until you see Std Net Setup, and then press Select. If you have an optional MarkNet card installed in slot 1 or 2, you see Network 1 Setup or Network 2 Setup. 4 Press Menu until you see TCP/IP, and then press Select. 5 Press Menu until you see Set IP Address, and then press Select. Configure for TCP/IP 97