Lexmark W820 Setup Guide - Page 36

Accessing the printer system board, CAUTION, What do I do next?

Get Lexmark W820 - Optra B/W Laser Printer PDF manuals and user guides
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Accessing the printer system board CAUTION! If you are installing memory or option cards sometime after setting up the printer, turn the printer off and unplug the power cord and any other cables before continuing. 1 Locate the metal plate on the back of the printer. 2 Loosen the two thumbscrews. The thumbscrews do not come completely off the plate. 3 Gently pull the thumbscrews until you can grasp the system board. 4 Pull the system board out just far enough to access the connector slots. Do not fully remove the board from the printer. What do I do next? Task Installing memory cards Installing an optional firmware card Installing option cards Go to page... 25 28 30 24 Install memory and option cards

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
24
Install memory and option cards
Accessing the printer
system board
CAUTION!
If you are installing memory
or option cards sometime after setting up
the printer, turn the printer off and unplug
the power cord and any other cables
before continuing.
1
Locate the metal plate on the back
of the printer.
2
Loosen the two thumbscrews.
The thumbscrews do not come
completely off the plate.
3
Gently pull the thumbscrews until
you can grasp the system board.
4
Pull the system board out just far
enough to access the connector
slots.
Do not fully remove the board
from the printer.
What do I do next?
Task
Go to page
…
Installing memory cards
25
Installing an optional firmware card
28
Installing option cards
30