Lexmark W820 Setup Guide - Page 68
legs with the pins on the locking, Push the locking brackets back
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
4 Lift the bottom of the finisher up slightly and extend the legs fully until you see molded arrows on the inside of the legs. Be sure to align the holes in the legs with the pins on the locking brackets. 5 Push the locking brackets back into place. 56 Set up the optional finisher
56
Set up the optional finisher
4
Lift the bottom of the finisher up
slightly and extend the legs fully
until you see molded arrows on
the inside of the legs.
Be sure to align the holes in the
legs with the pins on the locking
brackets.
5
Push the locking brackets back
into place.