Lexmark W820 Setup Guide - Page 79
Attaching the finisher to the printer, guide rail.
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Attaching the finisher to the printer Plastic spokes 1 Gently push the finisher and transport unit toward the divertor cover, until the plastic spokes on the transport unit are near the holes in the divertor cover. Alignment knob 2 Align the plastic spokes with the holes by rotating the two alignment knobs at the end of the guide rail. 3 Push the finisher toward the printer until the transport unit and divertor cover fit together firmly and the finisher latches with the printer. Set up the optional finisher 67
67
Set up the optional finisher
Attaching the finisher
to the printer
1
Gently push the finisher and
transport unit toward the divertor
cover, until the plastic spokes on
the transport unit are near the
holes in the divertor cover.
2
Align the plastic spokes with the
holes by rotating the two
alignment knobs at the end of the
guide rail.
3
Push the finisher toward the
printer until the transport unit and
divertor cover fit together firmly
and the finisher latches with the
printer.
Plastic spokes
Alignment knob