Lexmark W820 Setup Guide - Page 74
Installing the transportunit, Attaching the divertorcover
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Tip plate thumbscrew Tip plate 10 Loosen the two tip plate thumbscrews in the middle of the guide rail. 11 Fully extend the tip plates on the side of the guide rail. 12 Tighten the tip plate thumbscrews. Installing the transport unit The transport unit carries the printed pages across the top of the printer to the finisher. Attaching the divertor cover 1 Be sure you have removed the stacking arm (see "Removing the stacking arm" on page 54). 62 Set up the optional finisher
62
Set up the optional finisher
10
Loosen the two tip plate
thumbscrews in the middle of the
guide rail.
11
Fully extend the tip plates on the
side of the guide rail.
12
Tighten the tip plate thumbscrews.
Installing the
transport unit
The transport unit carries the printed
pages across the top of the printer to the
finisher.
Attaching the divertor cover
1
Be sure you have removed the
stacking arm (see
“
Removing the
stacking arm
”
on page 54).
Tip plate thumbscrew
Tip plate