Lexmark W820 Setup Guide - Page 7

Preface Stacking arm Jam access door (Door A) Multipurpose feeder About your printer Standard output bin Operator panel Power switch Tray 1 Front cover (Door F) Tray 2 Three printer models are available: • The Lexmark W820 printer, delivering 600 dots per inch (dpi) resolution at up to 45 pages per minute (ppm), ships with two 500sheet trays. This model comes with 32MB of standard memory. • The Lexmark W820n, a network model, comes with an Ethernet 10BaseT/100BaseTx print server installed. This model comes with 64MB of standard memory. • The Lexmark W820dn, a network model that ships with a duplex unit attached. Note: The illustrations in this manual represent the Lexmark W820 model with the optional high capacity feeder installed, unless it is necessary to show another configuration. Depending on the printer model you have chosen and the options you install, your printer may look different. You may have purchased your Lexmark W820 as part of a multifunction device with capabilities such as copying, faxing, or scanning. For information about setting up components other than the printer, refer to the documentation that came with your multifunction device. Preface vii