Linksys SPA921 Cisco Small Business IP Telephony Devices Provisioning Guide - Page 69
Automatic Resync, Define the Profile_Rule parameter.
UPC - 745883570799
View all Linksys SPA921 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Provisioning Tutorial Basic Resync 3 More detailed messages are available by programming the Debug_Server parameter (instead of the Syslog_Server parameter) with the IP address of the syslog server, and setting the Debug_Level to a value between 0 and 3 (3 being the most verbose). The contents of these messages can be configured using the following parameters: • Log_Resync_Request_Msg • Log_Resync_Success_Msg • Log_Resync_Failure_Msg. If any of these parameters are cleared, the corresponding syslog message is not generated. Occasionally, it may also be informative to capture an Ethernet packet trace of the interaction between the IP Telephony Device and the provisioning server. You can run the Ethernet packet analyzer (such as Ethereal/Wireshark) on a PC that is connected, through a hub or through a switch with port mirroring enabled, to the same subnet as the IP Telephony Device. Automatic Resync When a IP Telephony Device is deployed remotely or as part of an internal company deployment, it may need to resync periodically to the provisioning server, to ensure that any customer profile configuration changes made on the server are propagated to the endpoint, without requiring an explicit resync request to the endpoint. To cause the IP Telephony Device to automatically and periodically resync to a server, a configuration profile URL is defined using the Profile_Rule parameter, and a resync period is defined using the Resync_Periodic parameter. Exercise STEP 1 Using the PC web browser, open the admin/advanced page, Provisioning tab. STEP 2 Define the Profile_Rule parameter. STEP 3 The following value assumes a TFTP server IP address of 192.168.1.200: tftp://192.168.1.200/basic.txt Cisco Small Business IP Telephony Devices Provisioning Guide 67