Linksys SPA921 Cisco Small Business IP Telephony Devices Provisioning Guide - Page 91
Firmware Upgrade Parameters, Log_Upgrade_Request_Msg
UPC - 745883570799
View all Linksys SPA921 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Provisioning Field Reference Firmware Upgrade Parameters 4 Firmware Upgrade Parameters The following table defines the function and usage of each parameter in the Firmware Upgrade section of the Provisioning tab. Parameter Name Upgrade_Enable Upgrade_Error_Retry_Delay Downgrade_Rev_Limit Upgrade_Rule Log_Upgrade_Request_Msg Description and Default Value Enables firmware upgrade operations independently of resync actions. The default value is Yes. The upgrade retry interval (in seconds) applied in case of upgrade failure. The device has a firmware upgrade error timer that activates after a failed firmware upgrade attempt. The timer is initialized with the value in this parameter. The next firmware upgrade attempt occurs when this timer counts down to zero. The default value is 3600 seconds. Enforces a lower limit on the acceptable version number during a firmware upgrade or downgrade. The device does not complete a firmware upgrade operation unless the firmware version is greater than or equal to this parameter. The default value is (empty). This parameter is a firmware upgrade script with the same syntax as Profile_Rule. Defines upgrade conditions and associated firmware URLs. The default value is (empty). The syslog message that is issued at the start of a firmware upgrade attempt. The default value is $PN $MAC -- Requesting upgrade $SCHEME://$SERVIP:$PORT$PATH. Cisco Small Business IP Telephony Devices Provisioning Guide 89