Motorola I880 User Guide - Page 68
Exiting Direct TalkSM, Talk Range, Channels and Codes - take apart
View all Motorola I880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Direct TalkSM Exiting Direct TalkSM To set your phone to network mode when Direct Talk is active: 1 From the Direct Talk idle screen, press m. 2 Select DT Options. 3 Select Exit DirecTalk. Switching to Network Please Wait displays. After a few seconds, the network idle screen appears. Talk Range Phones used in Direct Talk mode should be a minimum of 6 feet apart to maximize performance and improve transmission range. Channels and Codes Your phone has 10 channels and 15 codes. Channels are divided into sets of frequencies that allow you to make and receive Direct Talk calls. Other parties may also be talking on the same channel. Codes help minimize interference from unwanted messages and other disturbances when you are on the same channel as others. To have a conversation, all parties must be on the same channel and code. For private Direct Talk calls, the person you are calling must be in Direct Talk mode and set to the same channel to which you are set in order to receive your call. Note: When making a Direct Talk call, all parties that are on your code and channel can hear your conversation. To set a channel: 1 From the Direct Talk idle screen, press A under Edit. 2 Scroll to Channel. 3 Press A under Edit. 4 Select a channel. 5 When you are finished, press A under Back to return to the idle screen. To set a code: 1 From the Direct Talk idle screen, press A under Edit. 2 Scroll to Code. 3 Press A under Edit. 4 Select a code. 5 When you are finished, press A under Back to return to the idle screen. 58