Motorola I880 User Guide - Page 69

Making and Receiving Calls in Direct TalkSM Mode To make a call on a specific code and channel using Direct Talk: 1 From the Direct Talk idle screen or the channel and code edit screen, press and hold the Walkie-Talkie button. Transmit appears on the display. Begin speaking after your phone emits the Direct Talk tone. 2 Release the Walkie-Talkie button to listen. The tone emitted from your phone when making a Direct Talk call is 4 beeps and sounds different from the standard tone heard with Walkie-Talkie calls, Group Walkie-Talkie calls, and Talkgroup calls. If you receive an error message: • There may be no parties on your channel or code. • You are out of range. When you receive a call using Direct Talk, Receive appears on the display. Channels and Codes Receive All You can set your phone to receive Direct Talk transmissions from any phone that is set to the same channel, regardless of the code (1-15), by setting the code to Receive All. When you receive transmissions with the code set to Receive All, the display changes from Receive All to the code on which the transmission was received. Note: You cannot initiate a call when the code is set to Receive All. If you press the Walkie-Talkie button with the code set to Receive All, you will receive an error message. To set the code to Receive All: 1 From the Direct Talk idle screen, press A under Edit. 2 Scroll to Code. 3 Press A under Edit. 4 Select Receive All. 5 When you are finished, press A under Back to return to the idle screen. 59