NEC NP-P502WL Users Manual - Page 129
Over-Temperature Protection, Should this happen, do the following
![]() |
View all NEC NP-P502WL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
9. Appendix Over-Temperature Protection If the projector inside temperature gets too high, the light modules will be turned off automatically and the status indicator will start to blink (2-cycle On and OFF). Should this happen, do the following: • Unplug the power cord after the cooling fans stop. • Move the projector to a cooler location if the room where you are presenting is particularly too warm. • Clean the vents if they are clogged with dust. • Wait about 60 minutes until the inside of the projector becomes cool enough. 116
![](/manual_guide/products/nec-npp502hl-user-s-manual-c63136f/129.png)
116
9. Appendix
Over-Temperature Protection
If the projector inside temperature gets too high, the light modules will be turned off automatically and the status
indicator will start to blink (2-cycle On and OFF).
Should this happen, do the following:
• Unplug the power cord after the cooling fans stop.
• Move the projector to a cooler location if the room where you are presenting is particularly too warm.
• Clean the vents if they are clogged with dust.
• Wait about 60 minutes until the inside of the projector becomes cool enough.