NEC NP-P502WL Users Manual - Page 136
Removing the cable cover, Loosen the cable cover screws until the Phillips screw
View all NEC NP-P502WL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Removing the cable cover 1. Loosen the cable cover screws until the Phillips screwdriver goes into a freewheeling condition. • When suspended from the ceiling, hold so that the cable cover does not drop. • The screws cannot be removed. 9. Appendix 2. Remove the cable cover. (1)Rotate a little downwards so that the claw comes out of the projector's groove. (2)Slide downwards so that the claw on the cover edge comes out of the projector's groove. 2 1 2 123
123
9. Appendix
Removing the cable cover
1. Loosen the cable cover screws until the Phillips screw-
driver goes into a freewheeling condition.
•
When suspended from the ceiling, hold so that the cable
cover does not drop.
•
The screws cannot be removed.
2. Remove the cable cover.
(1)Rotate a little downwards so that the claw comes out of the
projector’s groove.
(2)Slide downwards so that the claw on the cover edge comes
out of the projector’s groove.
2
1
2