NEC NP-P502WL Users Manual - Page 41
(4) Changing Eco Mode/Checking Energy-Saving Effect, Using Eco Mode [ECO MODE], Use
![]() |
View all NEC NP-P502WL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
3. Convenient Features ❹ Changing Eco Mode/Checking Energy-Saving Effect Using Eco Mode [ECO MODE] When the [LIGHT MODE]'s [ECO MODE] is set to [ECO1] or [ECO2], the brightness and the operating sound are reduced. Furthermore, the power consumption is decreased and the projector's CO2 emissions are reduced. [ECO MODE] [OFF] Icon at the bottom of the menu Description 100% brightness The screen will be brightly lit. Status of LIGHT indicator Off [ECO1] [ECO2] Brightness will be at about 80%. The cooling fan will also slow down accordingly. Lower power consumption Brightness will be at about 50%. The cooling fan will also slow down accordingly. Lower power consumption considerably Steady Green light To turn on the [ECO MODE], do the following: 1. Press the ECO Button on the remote control to display [ECO MODE] screen. 2. Use the ▼▲ buttons to select, then press the ENTER button. The [ECO MODE] selection screen turns off and the projector switches to the selected mode. • When in the [ECO MODE], the LIGHT indicator lights green. NOTE: • The [ECO MODE] can be changed by using the menu. Select [SETUP] → [GENERAL] → [LIGHT MODE] → [ECO MODE]. • The [LIGHT HOURS USED] can be checked in [USAGE TIME]. Select [INFO.] → [USAGE TIME]. • After a lapse of 1 minute from when the projector displays no-signal guidance, a blue, black or logo screen, the projector goes into [ECO2] automatically. The projector will return to its original setting once a signal is accepted. • If the projector inside temperature becomes high caused on the high room temperature, the projector may decrease the brightness temporarily for protecting itself. This is a protective function called [FORCED ECO MODE]. When the projector is in the [FORCED ECO MODE], the thermometer symbol [ ] is indicated at the right bottom of the screen. When the projector inside temperature goes down by cooling the room or setting the fan mode to [HIGH], the [FORCED ECO MODE] will be released and the projector will be back to the original setting state. During the [FORCED ECO MODE], it disables to change the state by changing the setting of the [ECO MODE]. 28
![](/manual_guide/products/nec-npp502hl-user-s-manual-c63136f/41.png)