NEC NP-P502WL Users Manual - Page 93
Connecting to a Wired LAN
View all NEC NP-P502WL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
5. Installation and Connections Connecting to a Wired LAN The projector comes standard with the Ethernet/HDBaseT port (RJ-45) and the LAN port which provide a LAN connection using a LAN cable. To use a LAN connection, you are required to set the wired LAN settings on the projector menu. Select [SETUP] → [INSTALLATION] → [NETWORK SETTINGS]. (→ page 57). The network settings can also be selected from the APPS menu. Example of LAN connection Example of wired LAN connection Server Hub LAN cable (not supplied) NOTE: Use a Category 5 or higher LAN cable. Ethernet HDBaseT NOTE: • About the projector's Ethernet/HDBaseT and LAN ports The Ethernet/HDBaseT and LAN ports are the same, aside from the HDBaseT function. To connect to the LAN, use only 1 of the ports (it is not possible to connect both ports to the LAN). For controlling the projector by a HDBaseT transmitter whose control signal is not supported (or with which cannot connect the projector) or over the network, connect to the LAN port. At the same time, for controlling the projector over the network that is in the state of the NETWORK STANDBY On, connect to the LAN port. 80