NEC NP-P502WL Users Manual - Page 97
Connecting to a HDBaseT transmission device (sold commercially)
View all NEC NP-P502WL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
5. Installation and Connections Connecting to a HDBaseT transmission device (sold commercially) HDBaseT is a connection standard for home appliances that is established by the HDBaseT Alliance. Use a LAN cable sold commercially to connect the Ethernet / HDBaseT port of the projector (RJ-45) to a HDBaseT transmission device sold commercially. Control signals (serial and LAN) and remote control signals (IR commands) from an external device are only supported when the projector's power is turned on. Connection example Computer (for control use) Computer (for output use) Remote control Example of a transmission device Ethernet/HDBaseT HDMI output video device NOTE: • Please use a shielded twisted pair (STP) cable of Category 5e or higher for the LAN cable (sold commercially). • The maximum transmission distance over the LAN cable is 100 m. • Please do not use other transmission equipment between the projector and transmission equipment. The picture quality may be deteriorated as a result. • This projector is not guaranteed to work with all HDBaseT transmission devices sold commercially. 84