NEC NP-P502WL Users Manual - Page 64
Using the Wall Color Correction [WALL COLOR], LIGHT MODE]
View all NEC NP-P502WL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Using the Wall Color Correction [WALL COLOR] 4. Using On-Screen Menu This function allows for quick adaptive color correction in applications where the screen material is not white. [LIGHT MODE] Adjusting the energy savings settings and the brightness of each projector in multi-screen projection. For energy savings settings, see page 28 "4 Changing Eco Mode/Checking Energy-Saving Effect". ECO MODE ADJUST OFF ECO1 ECO2 CONSTANT BRIGHTNESS OFF ON The light module luminance (brightness) will be at the setup brightness for [ADJUST]. By controlling the brightness and fan speed according to the selected setting, energy can be saved and motion noise and the power consumption can be lowered. Can be selected when [CONSTANT BRIGHTNESS] mode is set to [OFF]. Brightness can be adjusted in 1% increments from 16 to 100%. When several projectors are used for multi-screen projection, the brightness can be adjusted individually on each projector. The adjustment is valid when [ECO MODE] is set to [OFF] and [CONSTANT BRIGHTNESS] is set to [OFF]. [CONSTANT BRIGHTNESS] mode will be canceled. Maintains 50% brightness of the factory default setting. NOTE: • [CONSTANT BRIGHTNESS] mode is a function used to maintain the brightness at a constant level. Color will not be fixed. TIP: • Brightness normally decreases with use, but by selecting [CONSTANT BRIGHTNESS] mode, the projector automatically adjust the output based on the projector used time, thereby maintaining a constant brightness throughout the life of the light module. However, if output is already at its maximum, brightness will decrease with use. 51