Netgear FS728TPv1 FS728TP User Manual - Page 126
Security > Management Security > TACACS, Host IP Address, Key String, Authentication Port
View all Netgear FS728TPv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual If default values are not defined, the system defaults are applied to the new TACACS+ new servers. To configure TACACS+ Settings: 1. Click Security > Management Security > TACACS+. The TACACS+ screen displays: Figure 6-3 The TACACS+ screen contains the following fields: • Host IP Address - Enter the TACACS+ Server IP address. • Key String - Enter the default authentication and encryption key for TACACS+ communication between the device and the TACACS+ server. • Authentication Port - Enter the port number via which the TACACS+ session occurs. The default port is port 49. • Timeout for Reply - Enter the amount of time (in seconds) the device waits for an answer from the TACACS+ server before retrying the query, or switching to the next server. Possible field values are 1-30. The default value is 5. • Single Connection - Select whether a single open connection between the host Authentication Port and the TACACS+ server is enabled or disabled. The possible field values are: - Enable - Enable a single connection. - Disable - Disable a single connection. • Active - Select whether this server is the primary or backup TACACS+ server used for authentication. The possible values are: - Primary - Define the TACACS+ Primary Server. Managing Security 6-5 v1.0, December 2007