Netgear R6400 User Manual - Page 11
Rear Panel, Position Your Router - factory reset
View all Netgear R6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
AC1750 Smart WiFi Router Table 1. LED and button descriptions (continued) LED Description USB 2.0-Printer • port • • Solid white. A USB device is connected and is ready. Blinking. A USB device is plugged in and is trying to connect. Off. No USB device is connected or someone clicked the Safely Remove Hardware button and it is now safe to remove the attached USB device. Ethernet ports 1-4 The LED color indicates the speed: white for Gigabit Ethernet connections and amber for 100 Mbps or 10 Mbps Ethernet connections. • Solid. A powered-on device is connected to the Ethernet port. • Blinking. The port is sending or receiving traffic. • Off. No device is connected to this Ethernet port. WiFi On/Off Pressing this button for two seconds turns the 2.4 GHz and 5 GHz WiFi radios on and off. button with LED If this LED is lit, the WiFi radios are on. If this LED is off, the WiFi radios are turned off and you cannot use WiFi to connect to the router. WPS button with This button lets you use WPS to join the WiFi network without typing the WiFi password. The LED WPS LED blinks white during this process and then lights solid white. You can disable LED blinking or turn off all LEDs except the Power LED. For information about how to do this, see Disable LED Blinking or Turn Off LEDs on page 107. Rear Panel The rear panel includes the connections and buttons shown in the following figure. Reset button Ethernet LAN ports 1-4 Internet USB 2.0 Power Power port port On/Off connector Figure 3. Router rear panel Pressing the Reset button restores the factory settings. See Factory Settings on page 179. Position Your Router The router lets you access your network anywhere within the operating range of your wireless network. However, the operating distance or range of your wireless connection can Hardware Setup 11