Netgear R6400 User Manual - Page 43
Add VLAN Tag Groups, ADVANCED > Advanced Setup > VLAN / Bridge Settings
View all Netgear R6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
AC1750 Smart WiFi Router The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > VLAN / Bridge Settings. 5. Select the Enable VLAN / Bridge group check box. 6. Select the By bridge group radio button. 7. Select a Wired Ports check box or a Wireless check box: • If your device is connected to an Ethernet port on the router, select a Wired Ports check box that corresponds to the Ethernet port on the router to which the device is connected. • If your device is connected to your router's WiFi network, select a Wireless check box that corresponds to the router's WiFi network to which the device is connected. Note: You must select at least one Wired Ports or Wireless check box. You can select more than one check box. 8. Click the Apply button. Your settings are saved. Add VLAN Tag Groups You can add VLAN tag groups to the bridge and assign VLAN IDs and priority values to each VLAN tag group. If you add a VLAN tag group to the bridge, packets sent between the device and the router's Internet port are not processed through the router's Network Address Translation (NAT) or firewall. To add a VLAN tag group: 1. Launch an Internet browser from a computer or wireless device that is connected to the network. Specify Your Internet Settings 43