Netgear R6400 User Manual - Page 162
Enable Port Triggering, ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
View all Netgear R6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
AC1750 Smart WiFi Router 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering. The Port Forwarding/Port Triggering page displays. 5. Select the Port Triggering radio button. 6. Click the Add Service button. 7. In the Service Name field, type a descriptive service name. 8. In the Service User menu, select Any, or select Single address and enter the IP address of one computer: • Any (the default) allows any computer on the Internet to use this service. • Single address restricts the service to a particular computer. 9. Select the service type, either TCP or UDP or TCP/UDP (both). If you are not sure, select TCP/UDP. 10. In the Triggering Port field, enter the number of the outbound traffic port that will open the inbound ports. 11. Enter the inbound connection port information in the Connection Type, Starting Port, and Ending Port fields. 12. Click the Apply button. The service is now in the Portmap table. You must enable port triggering before the router uses port triggering. See Enable Port Triggering on page 165. Enable Port Triggering To enable port triggering: 1. Launch an Internet browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. Specify Internet Port Settings 165