Netgear R6400 User Manual - Page 127
Set Up the Router in Bridge Mode, Enable AP Mode, Get dynamically from existing router
View all Netgear R6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
AC1750 Smart WiFi Router 6. Select the Enable AP Mode check box. 7. Scroll down and select an IP address setting: • Get dynamically from existing router. The other router on the network assigns an IP address to this router while this router is in AP mode. • Enable fixed IP settings on this device (not recommended). Use this setting if you want to manually assign a specific IP address to this router while it is in AP mode. Using this option effectively requires advanced network experience. Note: To avoid interference with other routers or gateways in your network, NETGEAR recommends that you use different wireless settings on each router. You can also turn off the wireless radio on the other router or gateway and use the R6400 router only for wireless client access. 8. Click the Apply button. The IP address of the router changes, and you are disconnected. 9. To reconnect, close and restart your browser and type http://wwwrouterlogin.net. Set Up the Router in Bridge Mode You can use your router in bridge mode to connect multiple devices wirelessly at the faster 802.11ac speed. You need two routers: one set up as a router and the other set up as a bridge. Smart WiFi Router Smart WiFi Router in bridge mode Figure 13. Router in bridge mode with an 802.11ac WiFi connection Installing your R6400 router as a bridge offers the following benefits: Specify Network Settings 129