Netgear RN3138 Rackmount Hardware Manual - Page 11
Status Information, Table 1. - review
View all Netgear RN3138 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
NETGEAR ReadyNAS OS 6 Rack-Mount Storage Systems Status Information You can obtain information about the status of your ReadyNAS 2120 or 2120 v2 storage system by reviewing the LEDs listed in the following table. Table 1. Status information Indicator Description Disk Activity LED (disk tray, top) The Disk Activity LEDs indicate these states: • Solid blue. A disk is present. • Blinking. The disk is active. • Off. No disk is present. Fault LED (disk tray, bottom) The Fault LEDs indicate these states: • Solid red. The disk was removed, failed, or is resynchronizing. • Off. No disk is active. Error LED (front panel) The Error LED indicates these states: • Solid red. The system needs attention. Use the local admin page to determine the problem. For more information, see the ReadyNAS OS 6.4 Software Manual, which is available at http://support.netgear.com/product/ReadyNAS-OS6. • Off. The system is healthy. LAN 1 and LAN 2 LEDs (front panel) The LAN LEDs indicate these states: • Solid blue. An Ethernet cable is connected. • Blinking. The Ethernet link is active. • Off. There is no Ethernet connection. LAN port LEDs (rear panel) Two LED status indicators are built into each LAN port. One LED is green and one is amber. They indicate port speed and activity as follows: • Green on, amber off. 1000 Mbps connection speed, no activity. • Green blinking, amber off. 1000 Mbps connection speed, activity. • Green off, amber on. 10 Mbps or 100 Mbps connection speed, no activity. • Green off, amber blinking. 10 Mbps or 100 Mbps connection speed, activity. • Green off, amber off. No connection. Power LED (front panel) The Power LED indicates these states: • Solid green. The system is powered on. • Blinking. The system is powering on or powering off. • Off. Power is not supplied to the system. ReadyNAS 2120 and 2120 v2 11