Netgear RN3138 Rackmount Hardware Manual - Page 62
Access the Inside of the Storage System, Ensure that the chassis cover is in place when the system is - warranty
View all Netgear RN3138 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
NETGEAR ReadyNAS OS 6 Rack-Mount Storage Systems Access the Inside of the Storage System You must access the inside of the system to replace a fan or on-board battery. WARNING: Ensure that the chassis cover is in place when the system is operating to allow proper cooling. If you do not strictly follow this practice, out-of-warranty damage to the system can occur. To access the inside of a ReadyNAS 2120, 3130 or 3138 storage system: 1. If your system is mounted in a rack, grasp the two handles on either side and pull the system straight out until it locks. The system is locked when you hear a click sound. 2. Remove the four screws holding the top cover in place. 3. Slide the top cover back. Maintenance 62
Maintenance
62
NETGEAR ReadyNAS OS 6 Rack-Mount Storage Systems
Access the Inside of the Storage System
You must access the inside of the system to replace a fan or on-board battery.
WARNING:
Ensure that the chassis cover is in place when the system is
operating to allow proper cooling. If you do not strictly follow this
practice, out-of-warranty damage to the system can occur.
To access the inside of a ReadyNAS 2120, 3130 or 3138 storage system:
1.
If your system is mounted in a rack, grasp the two handles on either side and pull the
system straight out until it locks.
The system is locked when you hear a click sound.
2.
Remove the four screws holding the top cover in place.
3.
Slide the top cover back.