Netgear RN3138 Rackmount Hardware Manual - Page 67
Replace the On-Board Battery, To replace the battery of a ReadyNAS 2120, 3130 or 3138 storage system
View all Netgear RN3138 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
NETGEAR ReadyNAS OS 6 Rack-Mount Storage Systems 3. Squeeze the latches on top of the fan and pull up gently to remove the fan from the housing. 4. Insert the replacement fan into the housing. 5. Connect the replacement fan's power connections. If the system power is on, the hot-plug feature causes the fan to start immediately. Replace the On-Board Battery Replace the battery only with the same or an equivalent type recommended by NETGEAR. Dispose of used batteries according to the manufacturer's instructions. DANGER: Installing the on-board battery upside down, which reverses its polarities, creates a risk of explosion. Take care to install the battery correctly. To replace the battery of a ReadyNAS 2120, 3130 or 3138 storage system: 1. Open the system and locate the battery holder. 2. Remove the old battery. Maintenance 67