Netgear WGR614v5 WGR614v5 Reference Manual - Page 134
Configuring the Macintosh for TCP/IP Networking, MacOS 8.6 or 9.x, MacOS X
View all Netgear WGR614v5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Reference Manual for the 54 Mbps Wireless Router WGR614 v5 • The default gateway is 192.168.0.1 4. Type exit Configuring the Macintosh for TCP/IP Networking Beginning with Macintosh Operating System 7, TCP/IP is already installed on the Macintosh. On each networked Macintosh, you will need to configure TCP/IP to use DHCP. MacOS 8.6 or 9.x 1. From the Apple menu, select Control Panels, then TCP/IP. The TCP/IP Control Panel opens: 2. From the "Connect via" box, select your Macintosh's Ethernet interface. 3. From the "Configure" box, select Using DHCP Server. You can leave the DHCP Client ID box empty. 4. Close the TCP/IP Control Panel. 5. Repeat this for each Macintosh on your network. MacOS X 1. From the Apple menu, choose System Preferences, then Network. C-18 July 2004 202-10036-01 Preparing Your Network