Netgear WGR614v5 WGR614v5 Reference Manual - Page 53
Turn Access Control On, Apply - wireless repeater
View all Netgear WGR614v5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Reference Manual for the 54 Mbps Wireless Router WGR614 v5 5. Click the Turn Access Control On check box. 6. Then, either select from the list of available wireless cards the WGR614 v5 has found in your area, or enter the MAC address and device name for a device you plan to use. You can usually find the MAC address printed on the wireless adapter. Note: You can copy and paste the MAC addresses from the firewall's Attached Devices menu into the MAC Address box of this menu. To do this, configure each wireless computer to obtain a wireless link to the firewall. The computer should then appear in the Attached Devices menu. 7. Click Add to add this wireless device to the Wireless Card Access List. The screen changes back to the list screen. Repeat these steps for each additional device you wish to add to the list. 8. Be sure to click Apply to save your wireless access control list settings. Now, only devices on this list will be allowed to wirelessly connect to the WGR614 v5. Wireless Configuration June 2004 202-10036-01 4-13