Netgear WN802Tv2 Reference Manual - Page 23

Configuring Your Basic WLAN Settings, admin, password, Login, Documentation, Support, Knowledge Base - password 3 1 3

Get Netgear WN802Tv2 - Wireless-N Access Point PDF manuals and user guides
UPC - 606449058505
View all Netgear WN802Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual 3. Connect an Ethernet cable from the WN802T v2 to the computer. 4. Connect the power adapter to the WN802T v2 and verify the following: • The PWR power light goes on. • The Ethernet port of the wireless access point is lit when connected to a powered on computer. • The WLAN LED should be blinking. Configuring Your Basic WLAN Settings The following section describes how to log in to the wireless access point and configure the basic WLAN settings. To log in and configure the WN802T v2 for LAN access: 1. Connect to the WN802T v2 by opening a browser window on your PC and entering http:// 192.168.0.233 in the address field. The WN802T v2 Login screen displays (see Figure 2-1). 2. Enter admin for the user name and password for password, both in lower case letters. Figure 2-1 Login screen 3. Click Login. The main menu of the WN802T v2 displays as shown in Figure 2-2. • When the wireless access point is connected to the Internet, you can click the Documentation link under the Support menu to view the documentation for the wireless access point online (see Figure 6-2). • When connected to the Internet, you can also click Knowledge Base to access NETGEAR's knowledge base online. Installation and Configuration 2-3 v1.0, September 2008

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
Installation and Configuration
2-3
v1.0, September 2008
3.
Connect an Ethernet cable from the WN802T v2 to the computer.
4.
Connect the power adapter to the WN802T v2 and verify the following:
•
The PWR power light goes on.
•
The Ethernet port of the wireless access point is lit when connected to a powered on
computer.
•
The WLAN LED should be blinking.
Configuring Your Basic WLAN Settings
The following section describes how to log in to the wireless access point and configure the basic
WLAN settings.
To log in and configure the WN802T v2 for LAN access:
1.
Connect to the WN802T v2 by opening a browser window on your PC and entering
http://
192.168.0.233
in the address field. The WN802T v2 Login screen displays (see
Figure 2-1
).
2.
Enter
admin
for the user name and
password
for password, both in lower case letters.
3.
Click
Login
. The main menu of the WN802T v2 displays as shown in
Figure 2-2
.
•
When the wireless access point is connected to the Internet, you can click the
Documentation
link under the
Support
menu to view the documentation for the wireless
access point online (see
Figure 6-2
).
•
When connected to the Internet, you can also click
Knowledge Base
to access
NETGEAR’s knowledge base online.
Figure 2-1
Login screen