Netgear WN802Tv2 Reference Manual - Page 59
Viewing the Available Wireless Stations List, Configuration, Monitoring, Wireless, Stations. - default ip
![]() |
UPC - 606449058505
View all Netgear WN802Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
NETGEAR Wireless-N Access Point WN802T v2 Reference Manual The factory settings are restored and the access point reboots. This takes about a minute. A list of the factory default settings can be found in the appendix in.Table A-1. Warning: Do not try to go online, turn off the Access Point, shut down the computer or do anything else to the Access Point until it finishes restarting. When the PWR light turns green, wait a few more seconds before doing anything with the Access Point. Viewing the Available Wireless Stations List The Available Wireless Station list contains a table of all IP devices associated with this wireless access point network defined by its wireless network name (SSID). To view the list of available wireless stations: 1. From the Configuration menu of the browser interface, select Monitoring and then Wireless Stations. The Available Wireless Stations list displays (see Figure 4-6). 2. Click Refresh to update the list and force the wireless access point to look for associated devices. Figure 4-6 Available wireless stations list • For each device, the Available Wireless Stations table shows data such as the MAC address, the BSSID, and the SSID (not populated). Management 4-7 v1.0, September 2008
![](/manual_guide/products/netgear-wn802tv2-reference-manual-43b7963/59.png)