Netgear WN802Tv2 Reference Manual - Page 25
Configuration, System, Basic, Time Zone., Daylight Saving., Current Time., NTP Client. - ip address
UPC - 606449058505
View all Netgear WN802Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
NETGEAR Wireless-N Access Point WN802T v2 Reference Manual To select the local time zone: 1. Select Configuration > System > Basic > Time. The Time Settings screen displays. Figure 2-3 Local time zone settings 2. Configure the following information: - Time Zone. From the pull-down menu, select the local time zone for your wireless access point from a list of all available time zones. The default is Pacific Time (US-Canada). - Daylight Saving. This option is always disabled. The default is no adjustment. - Current Time. The AP gets the current time from its system clock, or an NTP server if this is enabled. - NTP Client. Enable NTP Client to synchronize the time of the access point with an NTP Server. The default is Enabled. Note: You must have an Internet connection to get the current time from an NTP server. - Use Custom NTP Server. Check the option if you have a custom NTP server. The default is Disabled. - Hostname/IP Address. Enter the host name or the IP address of the custom NTP server. The default is time-b.netgear.com Installation and Configuration 2-5 v1.0, September 2008