Netgear WN802Tv2 Reference Manual - Page 71
Network Authentication, Data Encryption, Apply, Remote MAC Address field. - wireless bridge
![]() |
UPC - 606449058505
View all Netgear WN802Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
NETGEAR Wireless-N Access Point WN802T v2 Reference Manual 7. Enter the MAC (physical) address of the other bridge mode wireless access point in the Remote MAC Address field. Figure 5-2 Edit security profile 8. Under Authentication Settings, select one of the network authentication types from the Network Authentication drop-down menu (one of the supported types-WEP, WPA-PSK, or WPA2-PSK should be used to protect the communication). 9. Select encryption strength from the Data Encryption options available. 10. Click Apply. 11. You are taken back to the Wireless Bridge Settings screen (Figure 5-1) with the new profile information. Enable the profile now if you wish to. You can add more wireless access points in the same way for a total of six (these wireless access points must be configured for Multi-Point Bridging). 12. Click Apply to save your changes. Advanced Wireless Bridging 5-3 v1.0, September 2008
![](/manual_guide/products/netgear-wn802tv2-reference-manual-43b7963/71.png)