Netgear WN802Tv2 Reference Manual - Page 26
Apply, Configuration, DHCP Client, IP Address., IP Subnet Mask, Default Gateway., By default - dhcp server
UPC - 606449058505
View all Netgear WN802Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
NETGEAR Wireless-N Access Point WN802T v2 Reference Manual 3. .Click Apply to save your settings. To configure the Basic LAN settings: 1. Select IP under Configuration on the main menu. The IP Settings screen displays (see Figure 2-4).The default settings should be suitable for most users and environments. Figure 2-4 Basic IP settings 2. Enter the IP Settings fields of the WN802T v2. - DHCP Client. By default, the Dynamic Host Configuration Protocol (DHCP) client is disabled. If you have a DHCP server on your LAN you can enable DHCP and the wireless access point will get its IP address, gateway and DNS server settings automatically when you connect the WN802T v2 to your LAN. - IP Address. Enter the IP Address of your wireless access point. The default IP address is 192.168.0.233. To change it, enter an unused IP address from the address range used on your LAN; or enable DHCP. - IP Subnet Mask. Enter the subnet mask based on the IP address that you assign. The default is 255.255.255.0. - Default Gateway. Enter the IP address of the gateway for your LAN. For more complex networks, enter the address of the router for the network segment to which the wireless access point is connected. 2-6 Installation and Configuration v1.0, September 2008