Netgear WN802Tv2 Reference Manual - Page 58
Maintenance > Reset, Reboot, Apply, Restore Defaults, Restore to factory default settings, Warning - reset factory defaults
UPC - 606449058505
View all Netgear WN802Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
NETGEAR Wireless-N Access Point WN802T v2 Reference Manual To reboot the wireless access point from the user interface: 1. From the main menu of the browser interface, select Maintenance > Reset and then Reboot AP on the side menu. The Reboot AP screen displays as follows:. Figure 4-5 Reboot the AP 2. Select the Yes radio button next to the Reboot option, and then click Apply. Warning: Do not try to go online, turn off the Access Point, shut down the computer or do anything else to the Access Point until it finishes rebooting. When the power light turns green, wait a few more seconds before doing anything with the Access Point. To erase the current settings and reset the wireless access point to the original factory default settings: 1. In Step 1 of the previous section, select Restore Defaults from the side menu (see Figure 4- 5). 2. Select the Yes radio button next to the Restore to factory default settings option. 3. Click Apply. 4-6 Management v1.0, September 2008