Netgear WN802Tv2 Reference Manual - Page 44
Configuring WPA2 with RADIUS, Configuration, Advanced, RADIUS Server Settings, Apply, Security
UPC - 606449058505
View all Netgear WN802Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
NETGEAR Wireless-N Access Point WN802T v2 Reference Manual Configuring WPA2 with RADIUS Not all wireless adapters support WPA2. Furthermore, client software is required on the client. Make sure your client card supports WPA2. Consult the product document for your wireless adapter and WPA2 client software for instructions on configuring WPA2 settings. Figure 3-4 WPA2 with RADIUS security settings To configure WPA2 with RADIUS: 1. Under the Configuration tab, select Security on the main menu, select Advanced from the side menu, and then select RADIUS Server Settings. The RADIUS Server Settings screen displays. 2. Enter the RADIUS settings as shown in "Configuring the RADIUS Server Settings" on page 4-13. 3. Click Apply to save your RADIUS settings. 4. Under the Configuration tab, select Security from the main menu, and select Security Settings from the side menu. From the Network Authentication drop-down menu, select WPA2 with RADIUS from the list. By default, Data Encryption will be set to AES. 5. Wireless Client Security Separation is disabled by default. If enabled, associated wireless clients will not be able to communicate with each other. (This feature is intended for hotspots and other public access situations). 6. Click Apply to save your settings. 3-10 v1.0, September 2008 Wireless Security Settings