Netgear WN802Tv2 Reference Manual - Page 63
Configuring the Advanced Wireless Settings, RTS threshold., Fragmentation Length., Beacon Interval.
![]() |
UPC - 606449058505
View all Netgear WN802Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
NETGEAR Wireless-N Access Point WN802T v2 Reference Manual Table 4-2. Statistics Fields (continued) Field Broadcast Packets Multicast Packets Total Packets Total Bytes Description The number of broadcast packets sent and received since the WN802T v2 was restarted. The number of multicast packets sent and received since the WN802T v2 was restarted. The total number of wireless packets sent and received since the WN802T v2 was restarted. The total number of wireless bytes sent and received since the WN802T v2 was restarted. Configuring the Advanced Wireless Settings NETGEAR recommends that the Advanced Wireless Settings should be modified only by an administrator very familiar with the ramifications of changing the wireless LAN parameters. If set incorrectly, they can adversely affect the performance or connectivity of your wireless access point. The default settings should be adequate in most situations. Following is a description of each of the advanced wireless LAN parameters. • RTS threshold. The Request to Send threshold packet size determines if the wireless access point should use the CSMA/CD (Carrier Sense Multiple Access with Collision Detection) mechanism or the CSMA/CA (Carrier Sense Multiple Access with Collision Avoidance) mechanism for packet transmission: - With the CSMA/CD transmission mechanism, the transmitting station sends out the actual packet as soon as it has waited for the silence period. - With the CSMA/CA transmission mechanism, the transmitting station sends out an RTS packet to the receiving station, and waits for the receiving station to send back a CTS (Clear to Send) packet before sending the actual packet data. The default value is 2346 bytes. • Fragmentation Length. This is the maximum packet size used for fragmentation. Packets larger than the size programmed in this field will be fragmented. The Fragment Threshold value must be larger than the RTS Threshold value. The default value is 2347 bytes. • Beacon Interval. The Beacon Interval specifies the interval of time between 20ms and 1000 ms for each beacon transmission. Management v1.0, September 2008 4-11
![](/manual_guide/products/netgear-wn802tv2-reference-manual-43b7963/63.png)