Netgear WN802Tv2 Reference Manual - Page 40
RADIUS Server Settings, Configuring Wireless Security, Configuring WEP - dropping
UPC - 606449058505
View all Netgear WN802Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
NETGEAR Wireless-N Access Point WN802T v2 Reference Manual Record the WPA-PSK/WPA2-PSK key WPA RADIUS Settings. For WPA, record the following settings for the primary and secondary RADIUS servers: Server Name/IP Address: Primary Secondary Port Shared Secret RADIUS Server Settings You can setup or modify the RADIUS server settings to complement network authentication security options. The RADIUS server can be used with WPA/WPA2 network authentication. When using a RADIUS server, the RADIUS server settings must be configured before completing the Network Authentication security profile (see "Configuring WPA with RADIUS" on page 3-8, "Configuring WPA2 with RADIUS" on page 3-10, or "Configuring WPA and WPA2 with RADIUS" on page 3-11 for specifics on implementing these security options). Note: The RADIUS server settings only need to be configured once per wireless access point. To set up or modify the RADIUS server settings see: "Configuring the RADIUS Server Settings" on page 4-13. Configuring Wireless Security The following section covers configuration of each of the available wireless security options. Configuring WEP To configure WEP data encryption: 1. From the Network Authentication drop-down menu on the Securit Settings screen (see Figure 3-1), select either Open System or Shared Key. 3-6 Wireless Security Settings v1.0, September 2008